Skip to Content

Where to Buy Hardwood Lumber in Austin and Hutto

Fells Hardwood Supply in Hutto stocks hardwood lumber, sheet goods, finishes, and sanding supplies for woodworkers across the Austin metro — Austin, Round Rock, Cedar Park, Georgetown, Pflugerville, Leander, Kyle, Buda, Manor, and nearby — with staff who help you pick the right boards for your project.

What to know before you buy

Hardwood is sold by the board foot, not by the fixed stick. Bring a cut list if you have one so we can help estimate yield and waste. Ask about moisture content — especially important in Central Texas heat and in air-conditioned homes. If the milling letters (S2S, S4S) are new, start with the FAQs below before you hit the racks.

What's the best wood to build a table?

For dining tables, walnut, oak, maple, and cherry are popular for good reason — they machine well, take finish cleanly, and look right in a home. “Best” depends on budget, look, and how the table will be used. We help you match species to design and finish plan when you’re standing in front of the boards, not from a ranking list alone.

How thick should a table top be?

Most dining table tops finish around 1" to 1-1/2". Thicker tops add visual heft and suit heavier table designs; thinner tops are possible when the design and support allow. Buy rough stock thick enough to hit your finished target after flattening and milling — often 5/4, 6/4, or 8/4, depending on the target — and we can walk the tradeoffs in person.

What finish holds up on a kitchen table?

Film finishes like polyurethane or a hardwax oil over properly prepared wood hold up well for daily use. Prep and application matter as much as the brand. We stock finishes and can recommend a system based on how the table will be used — kids, hot pans, outdoor adjacent rooms, and so on.

Fells Hardwood Supply — Hutto, TX — serving Austin, Round Rock, Cedar Park, Georgetown, and the greater Austin metro.